![]() ![]() You can still replace the DLL and go to Control Panel > Sound, set the output format to Dolby Digital Live / DTS Interactive, and then switch back to the original DLL, Unfortunately, usually Windows PUMA (Protected User Mode Audio) will check the digital signature of the user-mode DLL and will refuse to play ("Failed to play test tone"),Įven so, PUMA will only re-verify the DLL signature after a system restart.īecause of that, and because Dolby Digital Live / DTS Interactive settings are used regardless of the DLL being loaded, ![]() Patch the kernel to permanently enable unsigned drivers.Īlternatively, here is another modification that does not require breaking the driver signature, and instead modifies one of the user-mode DLLs, Test-sign the driver and enable Test-mode.ģ. Press F8 before each boot and select "Disable driver signature enforcement".Ģ. This is an unsigned driver, you must do one of the following for the driver to load:ġ. ![]() Windows Vista / 7 / 8 - 32 bit and 64 bit - R2.71 M1: Windows Vista / 7 / 8 - 32 bit and 64 bit - R2.73 M1: Download Realtek HD Audio Codec Driver and replace the relevant file with the file provided:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |